This portable concrete mixer has a molded blade mixing system, making it easy to mix concrete on the spot. The unique helix-shaped polyethylene drum is resistant to dents, cracks and rust, and easy to clean.

This electric all-round cutter minimises the amount of water and slurry. Unlike other electric cutters, the blade rotates forward, cutting into the material efficiently with minimum effort on the operator. K 4000 is easily adaptable for dry cutting with the Vac attachment accessory for minimal dust generation. 

Powerful SDS Plus (TE-C) rotary hammer for heavy-duty concrete drilling and corrective chiseling, with Active Vibration Reduction (AVR). 

Designed for steel vibrator heads, up to 2-1/8" in diameter, this heavy-duty motor is designed for the rigors of the job site. Multiquip flex-shaft vibrators are designed for work in medium to high-slump concrete. Typical applications include small pours, slabs, driveways, stem walls and footings.

Our Cut-n-Break method is the natural choice when you need to cut deep without overcutting at the corners. The K 760 Cut-n-Break enables you to cut as deep as 16" from one side. The two high-speed blades make a core in the saw cut, which can then easily be broken off using the accompanying breaking tool. This way you easily work your way through the material, at a very low diamond tool and maintenance cost. Delivered with twin blades and a breaking tool.

The FS 400 series floor saws are true multi-purpose concrete saws, available with 11 hp Honda gas engines. They are compact and developed with a clear focus on ergonomics, making them ideal for small to mid-sized jobs.

The models of the CT36 trowel range feature a trowel diameter of 36 inches - ideal for finishing medium sized areas. The trowels are optimally balanced, therefore they can be effortlessly controlled in the wide range of speeds. The transmission brake, electronic safety switch and engine speed sensor offer additional triple protection for the user. In an emergency situation the device will simply switch off and the handle will come to a stand-still after no more than a three-quarter turn. Furthermore, the unit will only start if the throttle lever is set to zero. This prevents an inadvertent rotation of the handle on start-up.

Very powerful SDS Max (TE-Y) rotary hammer for heavy-duty concrete drilling and chiseling, with Active Torque Control (ATC) and Active Vibration Reduction (AVR)

• Weight according EPTA-Procedure 01/2003: 20.9 lb.
• Single impact energy: 8.5 ft-lbs
• Hammer drilling diameter range: 15/32 - 1-9/16 in

Poly drum mixers make sense for anyone looking to mix a variety of corrosive materials and seeking easy cleanup.

• Powered by a Honda GX160 engine
• 6-cubic foot (165 liters) capacity
• EasyClean polyethylene drum
• Mixes materials containing lime and other additives without damaging the drum

Versatile diamond drilling system for handheld or rig-based coring up to 160 mm (6-1/4”)

• Diameter range: 8 - 162 mm
• Base material: Concrete, Masonry
• Operation mode: Hand-held or rig-mounted drilling system

• Heavy-duty frame with a low center of gravity
• Powered by a Honda GX390 engine recoil start
• Large 5.5-gallon (20.8 liters) fuel tank for extended uninterrupted service
• Foam-filled tires provide additional traction and puncture resistance
• Forklift pockets for easy loading
• Increased stability and traction
• The capacity of 16-cubic feet (453 liters)
• Ideal for landscaping applications, material sub-base distribution, job site cleanup and material transport
• Travels up to 7.25 mph (11.5 kph)
• Infinitely variable, fully hydraulic drive system for smooth and steady operation
• Removable tires for easy access to narrow work areas