• 360-degree heat coverage
• Commercial grade steel with gold hammered powder coat
• Easy start electric ignition
• 41,000 BTU/hour output
• Unique collapsible design for transport and storage
• Propane tank conveniently stores in base
• Built-in wheels for easy transport

Includes the Following Accessories:

* 16oz. Propane Cylinder (Full)

* 8.5" x 6" Aluminum Drip Pan

* Traveler Cargo Protector

Deposit: $10

250 Gallon Reverse Flow

The 250 Gallon Reverse Flow comes standard on 3×8 trailer. Most customers order the 5×8 trailer because it includes a 28" x 96" storage basket.
Bubba Grills reverse flow smokers force the heat to circulate inside the grill before exiting the chimney, eliminating cold spots and giving your BBQ mouthwatering flavor.

Standard features on the 250 Gallon Reverse Flow

● Overlapping doors
● Two full length sliding racks
● Stainless thermometers
● 1.5 inch brass drain
● Propane igniter in the firebox
● Safety door catches
● 15" wheels and tires
● 3500 lbs axles

Our Rhino tables are built with high-density polyethylene resin, and steel legs and frame. These are HEAVY-DUTY, resin tables (not Lite Duty, like common blow mold tables). They have been independently tested and rated at 2400 lbs. capacity (unlike blow mold tables, rated at only 400 lbs.). Weather resistant and low maintenance, these Rhino tables never need sanding or refinishing. The rounded corners help to avoid damage. This lightweight table is easy to set up and take down. The gravity locking, wishbone legs are standard, and the tops have a ¾ inch edge to allow for skirting.

Our Rhino tables are built with high-density polyethylene resin, and steel legs and frame. These are HEAVY-DUTY, resin tables (not Lite Duty, like common blow mold tables). They have been independently tested and rated at 2400 lbs. capacity (unlike blow mold tables, rated at only 400 lbs.). Weather resistant and low maintenance, these Rhino tables never need sanding or refinishing. The rounded corners help to avoid damage. This lightweight table is easy to set up and take down. The gravity locking, wishbone legs are standard, and the tops have a ¾ inch edge to allow for skirting.

Our Rhino tables are built with high-density polyethylene resin, and steel legs and frame. These are HEAVY-DUTY, resin tables (not Lite Duty, like common blow mold tables). They have been independently tested and rated at 2400 lbs. capacity (unlike blow mold tables, rated at only 400 lbs.). Weather resistant and low maintenance, these Rhino tables never need sanding or refinishing. The rounded corners help to avoid damage. This lightweight table is easy to set up and take down. The gravity locking, wishbone legs are standard, and the tops have a ¾ inch edge to allow for skirting.

We evaluated the engineering of plastic folding chair manufacturers and took the best qualities of each to engineer our top quality commercial grade Plastic Folding Chair. Weighing in at a lightweight of just over 7.5 lbs, we use a real 18 gauge steel to ensure the sturdiness and reliability of this item. Three drain holes are drilled into the chair seat to stop rain water from accumulating; and the legs are set at the requisite angle. The side holes are placed 3/4" from the end and the plastic is reinforced around the side holes to ensure the plastic seat maintains its resiliency. The polypropylene seat and back are softened to avoid the brittleness that causes chair breakage in extreme cold and extreme heat.